硫酸钾造粒机、硫酸钾挤压造粒机、硫酸钾干法造粒机

  硫酸钾造粒机、硫酸钾挤压造粒机、硫酸钾干法造粒机
DH系列干法滚压造粒机   DH Series Dry Roller Pressing Granulator
概述 Descriptions
粉体造粒技术作为粉粒体过程处理的一个***主要分支，随着环保需求和生产过程自动化程度的提高，其重要性日益彰显。“粉状产品颗粒化”已成为世界粉体后处理技术的必然趋势。对粉状产品进行颗粒的强度加工，其意义主要体现在三大方面：
Powder granulation technology as a main branch of the powder process, with the increase of environmental protection requirements and the degree of automation of production process, its importance is increasingly evident. "Powder products" has become an inevitable trend in the world of postprocessing technology. The strength of the powder product is processed, and its significance is mainly reflected in three aspects:
一、降低粉尘污染，改善劳动操作条件。
One, to reduce dust pollution, improve labor operation conditions.
二、满足生产工艺要求，如提高孔隙率和比表面积，改善热传递等。
Two, to meet the requirements of production process, such as improve the porosity and specific surface area, improve heat transfer, etc..
三、改善产品的物理性能（如流动性、透气性、堆密度）避免后续操作过程（干燥、筛分、计量）和使用过程（计量、配料等）出现偏析、脉动、结块、架桥等不良影响，减少污染、改善外观、改善流动性、便于贮存和运输、控制溶解度、控制孔隙率和比表面积等等，为提高生产和使用过程的自动化以及密闭操作创造了条件。
Three, to improve the physical properties of the products (such as liquidity, permeability, bulk density) to avoid subsequent operation process (drying, screening and measurement) and use process (measuring, mixing, etc.) segregation, pulsating, caking, bridging adverse effects appear, reduce pollution, improve the appearance, improve the liquidity, easy storage and transportation, solubility control, to control the porosity and specific surface area and so on, create the conditions for improving the production and use of process automation and closed operation.
DH系列干法辊压造粒机是采用干法辊压工艺技术，对含水量≤5%的粉状物料进行压缩成片或块状，再经破碎整粒、筛分工艺，使片块状物料变成符合使用要求的颗粒状物料。干法辊压造粒主要靠外部加压方式，使物料强制通过两个相对旋转辊轮间隙，强制压缩成片块状，在辊压过程中，物料的实际密度能增大1.5~3倍，从而达到－定的颗粒强度要求。
DH series dry rolling granulator is the dry rolling technology and compressed into tablets or block the content is less than or equal to 5% of the powdery material containing, crushing granulation and sieving, massive materials into in accordance with the requirements of granular materials. Dry rolling granulator mainly rely on external pressure, the material is forced through the gap between two relatively rotating rollers, forced compression block into a film, in the rolling process, the actual density of material can be increased 1.5 times, in order to reach the demands of granular strength.
 硫酸钾造粒机、硫酸钾挤压造粒机、硫酸钾干法造粒机工作原理Working principle
原料经定量加料器均匀送入喂料斗, 压实机利用带有穴眼孔的成对轧辊，彼此留有一定间隙，两者以相同的转速作反向旋转。其中一组轧辊轴承座在机架内不动，而另一组轧辊轴承座则在机架导轨上游动，藉助液压缸施压使彼此紧靠。轧辊表面上有规则地排列许多形状、大小相同的穴眼孔，且波谷对准波谷。而此时干粉状物料从两轧辊上方连续均匀地靠自重及强制喂料进入两轧辊之间，物料先作自由流动，进入咬入区后被轧辊逐渐咬入波谷。随着轧辊的连续旋转，物料占有的空间逐渐减少而被逐步压缩，并达到成型压力***大值。随后则压力逐渐降低，所压得之型块因弹性回复加之自重而脱落穴眼孔而进入碎整粒、筛分装置，所得成品为粒状合格产品，进行过秤包装。而粉料口出来的细粉料和不合格的超大颗粒则由返料绞龙重新进入提升机加料口随同新鲜物料混合加入预加料斗而进入下一轮工艺流程。
Raw materials by quantitative feeder evenly into the feeding hopper, compaction machine is used with a hole of the eyelet pairs of rollers with each other to leave a gap, both with the same speed as reverse rotation. One group of roller bearing housings is not moving in the frame, while the other group of roller bearing housings are moving on the rack guide rail, and the hydraulic pressure cylinder is pressed to close the other. Roll on the surface arranged many shapes, the same size and alignment hole eyelet, trough trough. But this time dry powder material from the top of the two roller continuous evenly by gravity and forced feeding into the two rollers, the material to flow freely, in bite zone is roll gradually bite into the trough. With the continuous rotation of the roll, the space of the material possession gradually decreases and is gradually compressed, and reaches the maximum value of the molding pressure. Then pressure decreases, the pressure type block due to elastic recovery coupled with the weight off hole eyelet into pieces of whole grain, a screening device, the resulting refined granular qualified products, weighing packaging. The fine powder material and the non qualified super large grain are from the back to the ground to the lifting machine feeding port with the fresh material mixed with the pre feeding hopper and enter the next technological process.
 硫酸钾造粒机、硫酸钾挤压造粒机、硫酸钾干法造粒机特点Characteristic
◆ 无需任何添加剂，干粉直接造粒；
- without any additives, dry granulation;
◆颗粒强度可以调整，通过调节轧辊的压力，控制成品强度；
The strength of the particles can be adjusted, by adjusting the pressure of roller, control of the final strength;
◆循环操作，实现连续生产，成品产量高；
The cycle operation, continuous production, high yield of finished products;
◆物料经机械压力强制压缩成型，无需任何添加剂，产品纯度得到保证。
The material through mechanical force compression molding, without any additives, the purity of the product is guaranteed.
◆干粉直接造粒，无需后续干燥过程，更有利于现有生产流程的衔接和改造。
The dry granulation, without further drying process, existing production process is easy to convergence and transformation.
◆颗粒强度高，堆积比重的提高较其它造粒方式都更为显著，尤其适合于增加产品堆积比重的场合。
] high granule strength, the increase in the proportion of accumulation than other granulation are more significant, especially suitable for to increase the proportion of product accumulation of occasions.
◆适应原料范围广，颗粒强度可根据不同物料自由调整。
It has wide range of raw material, the strength of the particles can be freely adjusted according to different materials.
◆结构紧凑、维修方便、操作简单、工艺流程短、能耗低、效率高、故障率低。
It has the advantages of compact structure, convenient repair, simple operation, short process, low energy consumption, high efficiency, low failure rate.
◆可控制环境污染，减少粉体浪费和包装成本，提高产品运输能力。
We can control the environmental pollution, reduce waste and powder packaging costs, improve product transport capacity.
◆加料和喂料装置采用变频无级调整控制，自动化程度高，可实现一人多机控制，具有劳动强度低及 可长期连续运转等特点。
* feeding device is controlled by the frequency conversion stepless speed regulating, high degree of automation, to achieve a multi machine control, has the characteristics of labor intensity is low and the continuous operation for a long time and so on.
◆主要传动部件均采用优质合金材料。不锈钢材料、钛材、铬和其他表面合金制作大大提高了耐磨损、耐腐蚀、耐高温及耐压能力，使该机具有较长的使用寿命。
The main driving parts are made of high quality alloy material. Stainless steel materials, titanium, chromium and other surface alloy production greatly increased the wear resistance, corrosion resistance, high temperature and pressure, so that the machine has a long service life.
 硫酸钾造粒机、硫酸钾挤压造粒机、硫酸钾干法造粒机工艺流程：
Technological process
干粉通过螺旋输送机、皮带机或人工搬运进入提升机的原料仓，由斗式提升机将原料粉末送人振动式过度料仓，经过定量加料装置将物料均匀地加入变频式强制喂料机，对物料进行脱气预压缩，经预压缩的物料被压人两个相对的压辊中间进行压实，被压实的条片物料自动脱槽后进入破碎，被粉成大小不均的颗粒，然后进入双刀造粒机进行修整，修整后的颗粒通过分筛，产品颗粒经过打包或用输送机输入成品料仓，筛分下来的粉状物料经回料装置输入原料提升机，进行二次加工。
Dry powder enters through the screw conveyor, belt machine or manual handling lifting machine from raw material warehouse, bucket elevator will give excessive vibration type powder silo, after the material quantitative feeding device is added evenly frequency type forced feeding machine, material degassing pre compression, pre compression material is pressed two the middle roller compaction, automatic strip material removal groove compaction after entering into particles was broken, powder uneven size, then trimmed into the double knife granulator, trimmed particles through the sieve, the product package or conveyor particles after input finished product bin, powder material screening down the feed back device input raw material hoist, two processing.

 
 硫酸钾造粒机、硫酸钾挤压造粒机、硫酸钾干法造粒机机组结构Unit structure
1、 预加料器：带有机械振动的加料斗,自动控制 ,定时振动 。
1, pre feeder: with mechanical vibration hopper, automatic control, timing vibration.
2、定量加料器：采用变频调速，确保加料精度。
2, quantitative feeder: frequency control, to ensure the accuracy of feeding.
3、强制喂料螺旋加料斗：采用变频调速电机、锥螺旋、搅拌刀齿及带视镜窗的锥形加料斗以及喂料口组合等组成，其作用是进一步完成脱气并进行压力加料。
3, forced feeding screw feeding hopper: the frequency speed regulating motor, spiral bevel, stirring knife teeth with glass window of the conical hopper and the feeding port of the combination etc. composition, its role is to further achieve degassing and feed pressure.
4、轧片机：由左右固定轴承座及滑动轴承座、框架结构、二根合金钢轧辊、二只液压油缸及电动自动泵站以及硬齿面专用减速器与主电机组成轧片主机。
4, rolling machine is composed of a left and a fixed bearing seat and the sliding bearing seat, frame structure, two root alloy steel roller, two hydraulic oil cylinders and automatic electric pumping station and hardened special deceleration device and the main motor rolling main composition.
5、碎整粒机：由切碎箱体、切碎主轴、专用旋转刀片构成碎整粒室由电机带动主轴作高速旋转,将挤压成形的物料破碎整粒。
Broken 5, the whole cutter: by cutting up box, chopped spindle and special rotating blade form broken whole grain room by the motor drives the main shaft for high-speed rotation, the extrusion of material crushing whole grain.
6、振动分级筛：带防堵网装置，方便清理筛网，由碎整机出来的碎粒粉料经该机筛分成粒状产品及回用粉料。
6, vibration classification screen: with anti blocking device, easy to clean the screen, by the broken machine out of the crushed powder material by the machine sieve into a granular product and return with powder.
7、回料绞龙：将振动分级筛返回的不合格粉状物料输送到加料提升机。
7, back to the material of the Dragon: the vibration of the back of the classification of non qualified powder material conveying to the feeder.
8、斗式提升机：上下链轮采用组装式结构，用于输送物料。
8, bucket type lifting machine: the upper and lower sprocket with the assembly structure, for conveying materials.
9、电控柜：由电控箱体、变频调速控制器、电流表、电压表、指示灯、按钮开关、电压转换开关等电气元器件组成，所有电器集中控制操作。
9, electric control cabinet, composed of electric control cabinet, frequency conversion speed controller, current meter, voltage meter, indicator light, a button switch, voltage conversion switch and other electrical components, all the electric centralized control operation.
 硫酸钾造粒机、硫酸钾挤压造粒机、硫酸钾干法造粒机应用物料Application materials

适用物料  Applicable material

肥料：硫酸钾、氯化钾、俄罗斯红钾、复混肥、氯化铵、硝酸钾、磷酸一铵、磷酸二铵、硫酸铵、碳酸氢铵。 Fertilizer: potassium sulfate, potassium chloride, potassium of Russia red, compound fertilizer, ammonium chloride, potassium nitrate, phosphoric acid ammonium, diammonium phosphate, ammonium sulfate, ammonium hydrogen carbonate. 粉体材料：抗氧剂、溴氯海因、氰化钠、二氯异氰尿酸钠、三氯异氰尿酸钠、氰尿酸、漂粉精、氧化锌、氧化铅、碳酸钾、碳酸锶、氯化钙、磷酸氢钙、偏硅酸钠、正硅酸钠、冰晶石、氟化铝、刹车粉、橡塑助剂、白炭黑、铝酸钙、重钙、普钙、光卤石、磷矿粉、金属粉末、填料、饲料添加剂、砒虫啉、烟酸、烟酸胺、医药中间体、炼钢助剂、融雪剂、膨润、氧化铝粉、磷石膏、脱硫石膏、选矿剂、环保材料等。 Powder material: antioxidant, bromine chlorine hydantoin, sodium cyanide, dichloro isocyanurate uric acid sodium, trichloro isocyanuric acid sodium, cyanuric acid, bleaching powder, zinc oxide, lead oxide, potassium carbonate, strontium carbonate, calcium chloride, calcium hydrogen phosphate, sodium silicate, sodium silicate, cryolite, aluminum fluoride, brake powder, rubber additives, white carbon black, aluminum acid calcium, calcium carbonate, calcium superphosphate, carnallite, phosphorite powder, metal powder, filler, feed additives and arsenolite of imidacloprid, nicotinic acid, nicotinic acid amine, pharmaceutical intermediates, steelmaking auxiliary, snowmelt agent, bentonite, alumina powder, phosphorus gypsum, desulfurization gypsum, dressing agent, environmental protection material.

 硫酸钾造粒机、硫酸钾挤压造粒机、硫酸钾干法造粒机应用举例Application examples

物料名称	规格型号	粒度要求（mm）	产量（Kg/h）
氯化钾、俄罗斯红钾	DH360、DH450、DH650	2.0~4.75	1000~1500、2000~2600、3200~4500
硫酸钾	DH360、DH450、DH650	2.0~4.75	1000~1300、2000~2500、3000~4500
NPK复混肥	DH360、DH450、DH650	2.0~4.75	900~1500、1800~2600、3000~4500
冰晶石	DH360、DH450、DH650	2.0~4.75	1000~1500、2000~2600、3200~4500
氯化铵、硫酸铵	DH360、DH450、DH650	2.0~4.75	800~1000、1800~2500、3100~4600
抗氧剂	DH360	0.3~2.0	300~400
氧化锌	DH360	1.5~2.5	350~500
氰化钠	DH360	1.5~6.0	800~1000
炼钢助剂	DH360	橄榄状	1000~1200
融雪剂	DH360	2.0~7.0	800~1000
溴氯海因	DH240	1.5~6.0	~300
医药中间体	DH240	0.5~2.0	~200
环保中间体	DH240	8.0~15.0	~500

 硫酸钾造粒机、硫酸钾挤压造粒机、硫酸钾干法造粒机技术参数Technical parameters

型号Model	DH360	DH450	DH650	DH800	DH1000
轧辊直径（mm）	φ360	φ450	φ650	φ800	φ1000
有效使用宽度（mm）	170-230	190-280	290-330	380-450	500
轧辊转速 (rpm)	10-25	10-25	10-25	10-25	10-20
***大成型压力(KN)	800	1300	2100	2900	3500
轧片***大厚度(mm)	8	12	16	25	35
轧片产量(Kg/h)	1600	3000	6000	10000-16000	26000
成品产量(kg/h)	900-1300	1800-2500	3500-4000	6000-8000	13000-16000
成品粒度(mm)	0.5-6	0.5-6	0.5-6	0.5-6	0.5-6
主机功率(Kw)	30-37	55-75	90-110	210-250	315
装机总容量(Kw)	55	90	175	298	450
外形尺寸(L.W.H.)	2350×2000×2600	2600×2200×2900	3600×2800×3200	4200×3500×3500	3800×3500×3800
设备总重量(t)	10	15	25	33	45

注意：轧片产量、成品产量为参考值，网板据物料的性质确立。
Note:  rolling yield, yield of finished products for reference, according to the material properties of the establishment of board.